Jul. 20, 2022
Aluminium Ceramic Foam Filter Plate is suitable for the temperature of 1000 ℃, suitable for the filtration and purification of aluminum and alloy solutions.
In order to meet the increasing quality requirements of aluminum castings, the use of alumina ceramic foam filters (plates) is becoming more and more important. Filters are also widely used in ordinary sand casting, such as wet mold casting, and fixed mold casting, such as automotive aluminum parts casting.
A selection range of 10ppi coarse porosity to 40ppi very fine porosity, so there will always be a product standard that suits your requirements. Both ordinary sizes and special sizes required by customers can meet the requirements.
There are two cutting cornners for alumina ceramic foam filters:
There are two wrapped sides for alumina ceramic foam filters:
Physical performance indicators:
Color | White |
AL2O3 Content | ≥83% |
Porosity | ≥85% |
Proportion | 0.3g/cm³-0.45g/cm³ |
Refractory temperature | ≥1500℃ |
Bending strength | >0.5Mpa |
Thermal shock resistance | 750℃/5times |
Solubility | Under the temperature of metal aluminum and aluminum alloy solution, the filter equipment will not chemically react with the solution and dissolve. |
Strict Quality Inspection of SIC Ceramic Foam Filters
Nov. 19, 2024
+86 158 3011 4065
Guoruiyuan Building, ShengLi North Street, Chang'An District, Shijiazhuang City, Hebei Province, China.
Navigation